1. Surfaces to be painted must be thoroughly cleaned and free of oil, dust, grease, wax, old loosely adhering finish, craking and scaling paint by wiping, scrping, sanding, and/ or by wire brushing. 
2. Treat surface with SPHERO RUST CONVERTER. Let stand overnight, then wipe off with clean rag soaked in lacquer thinner white residue. 
3. Apply with either brush, spray, one (1) or (2) coats of the SPHERO METAL PRIMERS : RED OXIDE , RED LEAD, ZINC CHROMATE or SPHERO PREPA-COAT, ENAMEL PRIMER SURFACER. 
4. Apply two coats of SPHERO QUICK DRYING ENAMEL PAINT. 

​

1. Surfaces to be painted must be thoroughly cleaned and free of oil, dust grease, wax, old loosely adhering finish, cracking and scaling paint or other contaminants by wiping, scraping, sanding, and / or by wire brushing. Ensure removal of grease and oil by use of solvent. 
2. If the existing paint is sound and shows normal chalking, sand lihgtly and wipe surface dust free. 
3. If existing paint shows cracking, alligatoring, peeling or is in generally poor condition, remove by scrping, wire-brushing or sanding. 
4. Treat surface with SPHERO RUST CONVERTER. Let stand overnight, then wipe off white residue with clean rag soaked in lacquer thinner. 
5. Apply with either brush, spray , one (1) or 2 coats of the SPHERO METAL PRIMERS : RED OXIDE, RED LEAD , ZINC CHROMATE or SPHERO PREPA-COAT ENAMEL PRIMER SURFACER.
​6. Apply two coats of SPHERO QUICK DRYING ENAMEL PAINT.